Disposal - Hilti PR 300-HV2 Operating Instructions Manual

Message displayed
Receiver battery symbol
en
Rotating laser battery
symbol
Tripod battery symbol
Display symbol
Auto E-targeting was not
successful

9 Disposal

WARNING
Improper disposal of the equipment may have serious consequences:
The burning of plastic components generates toxic fumes which may present a health hazard.
Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution.
Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal
injury, injury to third parties and pollution of the environment.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.
For EC countries only
Do not dispose of electronic measuring tools or appliances together with household waste.
In observance of the European Directive on waste electrical and electronic equipment and its implement-
ation in accordance with national law, electrical appliances and batteries that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations.
46
Fault
The receiver's battery is
empty.
The rotating laser's bat-
tery is empty.
The tripod battery is
empty.
Auto E-targeting is not
taking place.
Auto E-targeting was not
successful.
Possible cause
The receiver's battery is
empty.
The rotating laser's bat-
tery is empty.
The tripod's battery is
empty.
The receiver is outside the
Auto E-targeting range.
Auto E-targeting cannot
be completed.
Remedy
Charge the battery.
Charge the battery.
Charge the battery.
Hold the receiver within
the laser beam.
Restart the Auto
E-targeting function.