Ethernet Routing Switch 5000 Series Models - Nortel BayStack 5520-48T-PWR Install Manual

24 Installation fundamentals
With new cable installations, Nortel recommends that the use of an ESD
discharge cable to reduce the potential for damage from static that can
build up in cables. See
Figure 1
ESD cable
See to install an ESD cable.

Ethernet Routing Switch 5000 series models

This module describes the 5000 Series switches.
The following table lists the different Ethernet Routing Switch 5000 Series
models and the key features for each switch.
Table 1
5000 Series Switch Platforms
5000 Series Switch Model
Nortel Ethernet Routing Switch 5510-24T
Nortel Ethernet Routing Switch 5510-48T
Copyright © 2008–2009 Nortel Networks
Figure 1 "ESD cable" (page
Key features
•
24 ports
•
10/100/1GBase-T
•
Layer 4
•
Diffserv capability
•
Stackable
•
Two shared SFP transceiver ports
A 48 port, 10/100/1GBase-T, Layer 4,
diffserv-capable, stackable Ethernet switch. This
switch contains two shared SFP transceiver
ports.
•
48 ports
•
10/100/1GBase-T
•
Layer 4
•
Diffserv capability
•
Stackable
•
Two shared SFP transceiver ports
ERS 5000 Series Installation
NN47200-300 04.03
13 April 2009
24).