Power Specifications; Nortel Ethernet Power Supply 10 Power Specification; Nortel Ethernet Redundant Power Supply 15 Power Specification; Nortel Ethernet Dc-Dc Converter Module - Nortel BayStack 5520-48T-PWR Install Manual

100 Installation reference
Power specifications
This module describes the power specifications for the power supplies in
the 5500 Series.
Navigation
•
"Nortel Ethernet Power Supply 10 power specification" (page 100)
•

"Nortel Ethernet Redundant Power Supply 15 power specification"

(page 100)
•
"Nortel Ethernet DC-DC converter module" (page 100)
Nortel Ethernet Power Supply 10 power specification
The following table shows the power specifications for the Nortel Ethernet
Redundant Power Supply 10 (RPS 10).
Table 20
DC power specifications
Output current
Output voltage
Output power
Nortel Ethernet Redundant Power Supply 15 power specification
The following table shows the power specifications for the Nortel Ethernet
Redundant Power Supply 15 (RPS 15).
Table 21
DC power specifications
Input voltage
Input current
Inrush current
Output current
Output voltage
Output power

Nortel Ethernet DC-DC converter module

This module describes where to find the power specifications for the Nortel
Ethernet DC-DC converter module.
The Nortel Ethernet Routing Switch 5510 requires an additional DC-DC
converter module to use the Nortel Ethernet Routing Switch Redundant
Power Supply Model 15 (RPS 15). This module connects the RPS 15
to the Nortel Ethernet Routing Switch 5510 but is not required for other
switches in the 5500 Series.
Copyright © 2008–2009 Nortel Networks
ERS 5000 Series Installation
NN47200-300 04.03
13 April 2009
4.2 A maximum
-48 VDC
200 W maximum
100 to 240 VAC 50/60 Hz
10 A maximum
40 A maximum (regardless of ambient
temperature)
12.0 A
47.5 VDC
600 W