Advantech-DLoG DLT-V72 Mounting Instructions page 6

Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
DLT-V83: Attaching the keyboard holder
5
right/left
The figure shows the attachment of the keyboard holder on the left; the attachment on
the right is done analogously but mirror inverted.
Parts required:
1 x Advantech-DLoG keyboard holder right/left
−
− 3 x cylinder-head screw DIN 912 - M6 x 10 - A2, Tuflok
− 3 x washer ISO 8738 - A6-A2
− 4 x nut M4 bevel washer
Advantech Co.; Ltd.
 DLT-V83:
Fasten the
keyboard
holder
sidewards,
step 1.
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V3.00, PN 20080V7221
DLT-V83:

Fasten the
keyboard
holder
sidewards,
step 2.
Page 6 / 7