– CARE AND MAINTENANCE – ◊ On tables, use coasters under damp, hot or With a little care you can prolong the life of your coloured objects to avoid permanent stains. furniture. Follow the instructions for the materials of your specific product to make sure that it stays ◊...
Page 4
– PARTS – Right side x1 Left side x1 Seat x1 Backrest x1 Washer x8 Screw x8 Dowel x8 Allen key x1 This manual shows the Crate Lounge Chair. The same assembly procedure applies to the Crate Dining Chair. It’s recommended to be two persons performing the assembly.
Page 5
Protect the chair from scratches and other damage while assembling by using the cardboard packaging as underlay.
Page 6
Place the dowels G. on the sides of the seat C. and backrest D. .
Page 7
Remove the protective film from the self-adhesive washers Place the washers so they go over the screw holes as illustrated below. ...
Page 8
Place the seat and backrest on side Make sure the backrest turns the right way, with the longer section pointing away from the chair. BACKREST SEAT...
Page 10
Mount all the screws with the Allen key H, . NOTICE Do not fully tighten the screws.
Page 11
Carefully turn the chair over, making sure the loose end does not lose its position.
Page 12
Mount the remaining 4 screws with the Allen key H, . NOTICE Do not fully tighten the screws.
Page 13
Place the chair upright and fully tighten all screws. Do not overtighten. NOTICE Do not overtighten the screws as this can damage the product.
Page 14
Ready to use. Retighten screws after a few weeks of use if needed.
Page 15
– CARE & MAINTENANCE – Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture. Please find our Care & Maintenance...
Need help?
Do you have a question about the CRATE Series and is the answer not in the manual?
Questions and answers