Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hay ARBOUR ECO
Summary of Contents for Hay ARBOUR ECO
- Page 1 – DISASSEMBLY INSTRUCTION MANUAL – DISASSEMBLY...
- Page 2 – RECYCLING & DISASSEMBLY – All the furniture in this instruction manual is ecolabelled and designed to be long-lasting products made to endure years to come. The furniture is 100% recyclable and parts can be fully separated and recycled. All parts can be delivered to a suitable recycling facility.
-
Page 3: Table Of Contents
– TABLE OF CONTENTS – ARBOUR ECO AAC 12 ECO AAC 22 ECO AAS 32 ECO CPH 10 CPH 25 CPH 30 CPH 30 EXTENDABLE CPH 90 CPH 190 CPH DEUX 210 CPH DEUX 215 CPH DEUX 220 CPH DEUX 250... - Page 4 – TABLE OF CONTENTS – SOFT EDGE 12 CHAIR 32-33 SOFT EDGE 30 BAR STOOL SOFT EDGE 32 BAR STOOL SOFT EDGE 70 STOOL SOFT EDGE 72 STOOL TRIANGLE LEG TABLE TRIANGLE LEG BENCH...
-
Page 5: Arbour Eco
– ARBOUR ECO – 1. Remove the cushions. 2. Turn the sofa upside down and separate the base from the frame by unscrewing all the screws Cushion cover - EU_Ecolabelled fabrics Cushion filling - Feathers, polyurethane foam Bolts, nuts and washers - Steel... - Page 6 – ARBOUR ECO – 3. Remove the webbing base by lifting it up. 4. Unscrew all the screws to remove the steel profile and the wood profile from the frame. Webbing - Polyester Reinforcement bar - Steel Screws - Steel...
-
Page 7: Aac 12 Eco
– AAC 12 ECO – Gliders - Polyethylene Legs - Solid oak Fittings - Steel Shell - Mix of recycled and virgin polypropylene... -
Page 8: Aac 22 Eco
– AAC 22 ECO – Gliders - Polyethylene Legs - Oak veneer Legs - Beech plywood Fittings - Steel Shell - Mix of recycled and virgin polypropylene... -
Page 9: Aas 32 Eco
– AAS 32 ECO – 1. Turn the chair upside down. 2. Remove all the bushings from the bottom of the seat. 3. Remove the gliders and the footrest from the legs. 4. Separate the base from the seat. Gliders - polyethylene Legs - Oak veneer Legs - Beech plywood Footrest - Stainless steel... -
Page 10: Cph
– CPH 10 – 1. Turn the table upside down 2. Unscrew all the screws holding the legs and crossbar. 3. Separate the reinforcement bar from the crossbar by unscrewing the screws. 4. Unscrew the gliders from the legs. Gliders - Steel/PA Legs - Wood Screws - Steel Crossbar - Wood... - Page 11 – CPH 25 – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Unscrew the gliders from the legs. Gliders - Steel/PA Legs - Wood Brackets - Steel Reinforcement bar - Steel Screws - Steel Crossbars - Wood Tabletop - Wood...
-
Page 12: Cph
– CPH 30 – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Separate the reinforcement bar from the crossbar by unscrewing the screws. 4. Unscrew the gliders from the legs. Gliders - Steel/PA Brackets - Steel Crossbar - Wood Reinforcement bar - Steel... -
Page 13: Cph 30 Extendable
– CPH 30 EXTENDABLE – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Separate the reinforcement bar from the crossbar by unscrewing the screws. 4. Unscrew the gliders from the legs. Gliders - Steel/PA Legs - Wood Screws - Steel... -
Page 14: Cph
– CPH 90 – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Unscrew the gliders from the legs. Gliders - Steel/PA Crossbar - Wood Legs - Wood Screws - Steel Tabletop - Wood... -
Page 15: Cph 190
– CPH 190 – 1. Turn the table upside down. 2. Unscrew the gliders from the legs. Gliders - Steel/PA Legs, tabletop - Wood... -
Page 16: Cph Deux 210
– CPH DEUX 210 – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Unscrew the gliders from the legs. Gliders - Steel/PA Legs - Wood Screws - Steel Crossbar - Wood Tabletop - Wood... -
Page 17: Cph Deux 215
– CPH DEUX 215 – 1. Turn the bench upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Unscrew the gliders from the legs. Legs - Wood Screws - Steel Crossbar - Wood Benchtop - Wood... -
Page 18: Cph Deux 220
– CPH DEUX 220 – 1. Turn the bench upside down. 2. Unscrew all the screws holding the legs and crossbar. 3. Unscrew the gliders from the legs. Gliders - Steel/PA Legs - Wood Screws - Steel Tabletop - Wood... -
Page 19: Cph Deux 250
– CPH DEUX 250 – 1. Turn the table upside down. 2. Unscrew all the screws holding the legs and crossbar. Legs - Wood Screws - Steel Crossbar - Wood Tabletop - Wood... -
Page 20: Result Chair
– RESULT CHAIR – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Remove the bumpers from the backrest posts and the gliders from the legs. Ø10m Ø10mm m Backrest - Veneer Rivets - Aluminium Ø10m Ø10mm m... - Page 21 – RESULT CHAIR WITH UPHOLSTERY – 1. Unscrew the screws underneath the seat. 2. Remove the upholstery and the foam from the wooden shell. 3. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 4.
-
Page 22: Revolt Chair
– REVOLT CHAIR – 1. Unscrew the screws holding the seat and backrest. 2. Remove the screws and fittings underneath the seat. 3. Pull the gliders out of the legs. Backrest - ABS Fittings and screws - Steel Seat - ABS Bumpers - TPE Gliders - LLDPE Brackets - Steel... -
Page 23: Soft Edge 10 Chair
– SOFT EDGE 10 CHAIR – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the chair upside down and drill out the rivets holding the cover. Ø10m Ø10mm m Backrest - Wood... -
Page 24: Cph
– SOFT EDGE 10 CHAIR WITH UPHOLSTERY – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the chair upside down and drill out the rivets holding the cover. 4. -
Page 25: Soft Edge 10 Bar Stool
– SOFT EDGE 10 BAR STOOL – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the bar stool upside down and drill out the rivets holding the cover. Ø10mm Backrest - Wood Seat - Wood... - Page 26 – SOFT EDGE 10 BAR STOOL WITH UPHOLSTERY – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the bar stool upside down and drill out the rivets holding the cover. 4.
-
Page 27: Soft Edge 10 Sled
– SOFT EDGE 10 SLED – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Unscrew the gliders from the sled legs. 3. Turn the chair upside down and drill out the rivets holding the cover. Ø10mm Backrest - Wood Seat - Wood... - Page 28 – SOFT EDGE 10 SLED WITH UPHOLSTERY – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Unscrew the gliders from the sled legs. 3. Turn the chair upside down and drill out the rivets holding the cover. 4.
-
Page 29: Soft Edge 10 Lounge
– SOFT EDGE 10 LOUNGE – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the chair upside down and drill out the rivets holding the cover. Ø10mm Backrest - Wood Seat - Wood... - Page 30 – SOFT EDGE 10 LOUNGE WITH UPHOLSTERY – 1. Hold the seat and backrest while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the chair upside down and drill out the rivets holding the cover. 4.
-
Page 31: Soft Edge 12 Chair
– SOFT EDGE 12 CHAIR – 1. Turn the chair upside down. 2. Remove the cap from the gliders. 3. Unscrew the screw and remove the gliders’ receivers. Cap - PP Screws - Steel Receivers - PP Frame, seat, backrest - Wood... - Page 32 – SOFT EDGE 12 CHAIR WITH UPHOLSTERY – 1. Turn the chair upside down. 2. Remove the cap from the gliders. 3. Unscrew the screw and remove the gliders’ receivers. 4. Remove the upholstery and the foam from the wooden shell. Cover - Textile Foam - PU Cap - PP...
-
Page 33: Soft Edge 30 Bar Stool
– SOFT EDGE 30 BAR STOOL – 1. Hold the seat while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the stool upside down and drill out the rivets holding the cover. Ø10mm Seat - Wood Rivets - Aluminium... -
Page 34: Soft Edge 32 Bar Stool
– SOFT EDGE 32 BAR STOOL – 1. Turn the bar stool upside down. 2. Remove the cap from the gliders. 3. Unscrew the screw and remove the gliders’ receivers. 4. Unscrew the screws holding the footrest and remove it. Footrest - Steel Cap - PA Screws - Steel... -
Page 35: Soft Edge 70 Stool
– SOFT EDGE 70 STOOL – 1. Hold the seat while unscrewing the rivets, using a power drill with a 10mm bit. 2. Pull out the gliders from the legs. 3. Turn the chair upside down and drill out the rivets holding the cover. Ø10mm Seat - Wood Rivets - Aluminium... -
Page 36: Soft Edge 72 Stool
– SOFT EDGE 72 STOOL – 1. Turn the stool upside down. 2. Remove the cap from the gliders. 3. Unscrew the screw and remove the gliders’ receivers. Cap -PA Screws - Steel Receivers - PP Frame, seat - Wood... -
Page 37: Triangle Leg Table
– TRIANGLE LEG TABLE – 1. Turn the table upside down. 2. Unscrew the bolts holding the legs. 3. Unscrew the feet and the tapping screw in the top of the leg. 4. Unscrew all the screws to separate the frame from the table. Fittings - Steel Gliders - PA/steel Legs - Wood... -
Page 38: Triangle Leg Bench
– TRIANGLE LEG BENCH – 1. Turn the bench upside down 2. Unscrew the bolts holding the legs. 3. Unscrew the feet and the tapping screw in the top of the leg. 4. Unscrew all the screws to separate the frame from the bench. 5. - Page 39 Havnen 1 8700 Horsens Denmark +45 4282 0282 / hay@hay.com 9/03/2021...
Need help?
Do you have a question about the ARBOUR ECO and is the answer not in the manual?
Questions and answers