– CARE AND MAINTENANCE – With a little care you can prolong the life of your ◊ Avoid improper use such as sitting on the back or armrests, tilting the seats on their back legs, furniture. Follow the instructions for the materials putting your feet on the furniture or standing on it.
Page 4
Protect the bench from scratches and other damage while assembling. It’s recommended to be two persons performing the assembly.
Page 5
– PARTS – Left side x1 Right side x1 Seat x1 Backrest x1 Dowels x8 Washer x14 Screw x14 Allen key x1 This manual shows the assembly procedure for the Crate Dining Bench. The same assembly procedure applies to the Crate Lounge Sofa.
Page 6
Insert the dowels E. in the holes on the sides of the seat C. and backrest D. .
Page 7
Remove the protective film from seven of the self-adhesive washers Place the washers so they are positioned over the screw holes as illustrated below.
Page 8
Place side as illustrated, and secure with screws using Allen key Do not fully tighten the screws.
Page 11
Remove the protective film from the remaining self-adhesive washers Place the washers so they go over the screw holes as illustrated below.
Page 12
Place side as illustrated, and secure with screws using allen key Do not fully tighten screws.
Page 13
Carefully place the chair upright and fully tighten all the screws, taking care not to overtighten them.
Page 14
Ready to use. Retighten the screws after a few weeks of use if needed.
Page 15
– CARE & MAINTENANCE – Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture. Please find our Care & Maintenance...
Need help?
Do you have a question about the CRATE 327313 and is the answer not in the manual?
Questions and answers