Page 1
I NST RUCTION M A N UA L C OP E N H AG U E TA B L E C PH 10 B y R o n a n & E r w a n B o u r o u l l e c...
Page 2
I N T RODUCTION Copenhague is a furniture series designed by Ronan and Erwan Bouroullec designed especially for the University of Copenhagen in 2013. In addition to a homely and welcoming expression, functionality, durability and ease of cleaning were important design requirements for the university.
Page 3
C A R E A N D M A I N T ENA NCE C A R E A N D M A I N T ENA NCE LACQUERED OR STAINED WOOD LINOLEUM CAUTION With a little care you can prolong the life of your •...
Page 4
PA RTS NOT E ON HOW TO USE THE A S SEMBLY BR ACK ETS The instructions below show how to assemble the brackets, which appear in different steps throughout the instruction manual. Do not assemble them before the rest of the table, but wait until the relevant steps require their assembly.
Page 5
While assembling, keep the table inside the cardboard box with foam edge in order to protect Place 4 x C parts in the in the holes as indicated. Make sure that the threads on part C the tabletop from scratches etc. Make sure that all parts are included. are pointing upwards and the holes are facing each other.
Page 6
Place 2 x D in the holes as indicated. Make sure that the D parts’ tapered Carefully drop 4 x E into the holes as indicated, and gently tighten all four holes are pointing upwards. E parts little by little with the Allen key. Tighten all 4 x E parts completely.
Page 7
Use a proper screwdriver to fasten 8 x F in Turn the table over (2 persons recommended). the free holes in the frame.
Need help?
Do you have a question about the COPENHAGUE CPH10 and is the answer not in the manual?
Questions and answers