Bang & Olufsen BeoPlay V1-40 MKII Service Manual page 6

1.4 How to service
Pin code
Pin code active prior to service
Service code
Entering the Service code
Important notice concerning Service time
Activate the Pin code
IMPORTANT! If you are prompted for a pin code the first time you switch on your
television, enter the pin code, provided by your retailer.
The product has a 4 digit pin code, of the user´s own choice, which must be
entered if the product has been disconnected from the mains for 15-30 min.
If the pin code is activated, and the product has been without mains for 15-30 min.,
the user will be asked to enter the 4 digit pin code when the product is switched on.
Before the product is handled in for service it is a good idea to ask the customer to
deactivate the pin code.
The pin code is activated when the product is shipped from Bang & Olufsen.
Refer to the user guide for further information.
If the pin code is not deactivated prior to service you must use the service code to
unlock the product.
The service code
- unlocks the product, but does not affect the pin code setting,
- gives you 12 hours service time.
- Enter the Service code: 1 1 1 1 1 (despite the field indicates 4 characters only).
The service time is active as long as the product is connected to the mains,
including Standby.
To obtain maximum service time:
Only connect the product to the mains while you are performing actual service on
the product.
When the service time is expired, the product can only be unlocked by entering
the pin code or the Master code.
Select the TV > SETUP > PIN CODE menu.
Select PIN CODE and select ON/OFF.
Select NEW PIN CODE to change pin code.
Enter the 4 digit pin code. Re-enter the code to confirm it and press the Centre
button.