Bang & Olufsen BeoPlay V1-40 MKII Service Manual page 56

Hide thumbs Also See for BeoPlay V1-40 MKII:
Table of Contents

Advertisement

6.2
Specification guidelines for service use
PICTURE
Picture optimisation
Room adaptation
Colour Calibration
Contrast enhancement
Motion picture improvement
ANALOGUE TUNER
Video Type / Format
Frequency Range
Analogue Stereo Decoding Capabilities
Arial Input Connections
DIGITAL TUNER T2/C/S2 or T2/C
Video Type / Format
Audio Type / Format
Frequency, Range and IF Bandwidth
COFDM (Orthogonal Freq. Division Modulation) Spectrum
Modulation
Code Rate
Guard Interval
Symbol Rate
Arial Input Connection
ODU control
Common Interface and Smart Card Slots
VisionClear
Automatic Picure Control
10-point display calibration
Adaptive contrast algorithm
Global backlight dimming
Adaptive film judder compensation
Analogue:
According to type and setup:
B/G/L/L'/I/D/K/M
US: Not available
45 to 863 MHz
A2 + Nicam
1 × F-connector for analogue and aigital input
Optional (T2/C standard)
US: Not available
DVB-T/T2, DVB-C, MPEG2/4 HD
MPEG2: MP@ML, MP@HL
H264: MPEG4 AVC, main and high profile level 4
MPEG1: 2-channel audio decoder, layer 1 & 2
MPEG2: 2-channel audio decoder, layer 1 AAC, AAC+ Dolby Digital
Plus
DVB-T2:
104 MHz to 862 MHz (Band 3, 4, 5)
IF Bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174 to 230 MHz and 470 to 858 MHz
DVB-C:
48 MHz to 862 MHz (Band 3, 4, 5)
IF Bandwidth 8 MHz
Auto tuning 110 to 858 MHz
DVB-S2:
10700 to 12750 MHz
IF Bandwidth 950 to 2150 MHz
Auto tuning 174 to 230 MHz and 470 to 858 MHz
2K & 8K, hierarchical and non hierarchical
DCB-T/T2: QPSK, 16QAM, 64QAM
DVB-C: QPSK, 16QAM, 64QAM, 256 QAM
DVB-S/S2: 8PSK, QPSK
DVB-T/T2: 1/2, 2/3, 3/4, 5/6, 7/8, 3/5, 4/5
DVB-T/T2: 1/32, 1/16, 1/8, 1/4, 1/128, 19/256, 19/128
DVB-T/T2: 2 to 45 Msymb/s
DVB-C: 4 to 7 Msymb/s
DVB-S/S2: 1 to 45 Msymb/s
1 x F-connector for DVB-T2/C and analogue
Active antenna supply 5 V@50 mA
1 x F-connector for DVB-S (optional)
DiSEqC level 1.1 (digital satellite equipment control)
DC for switching between H/V polarizations
13.5 V +/-5% max. 450 mA
18.5 V +/-5% max. 450 mA
Tone Control for low or high band selection 22 kHz / 0.65 Vpp
+/-0.25 V duty cycle 50% +/-10%
Cable length compensation selectable +/-1 V LNB supply boost
Common Interface according to EN50221 CI and CI+
2 × PCMCIA (Common Interface only)
All CA Systems available as common interface are supported
CA Power Supply: 5 V/500 mA

Advertisement

Table of Contents
loading

This manual is also suitable for:

95059508

Table of Contents