Vrrp Tab; Graphing Switch Port Data - Nortel 5510 Configuration

44 Chapter 1 General System Monitoring Considerations

VRRP tab

The VRRP tab is used to display statistical information about VRRP
operation on the switch.
To view the VRRP tab, use the following procedure:
Step
1
2
3

Graphing switch port data

The Java Device Manager (JDM) provides the ability to view port statistical
information in a variety of graphs.
To make use of these capabilities, open the Graph Port screen by selecting
one or multiple ports on the Device View and then selecting Graph > Port
from the menu. This screen is illustrated below.
Copyright © 2005 - 2007, Nortel Networks
.
Action
Open the Graph Chassis screen by selecting Graph > Chassis
from the menu. The Graph Chassis screen opens.
Select the VRRP tab. This tab is illustrated below.
Graph Chassis screen - VRRP tab
Use the provided fields to view the VRRP statistics. These fields
are outlined in the following table.
Graph Chassis screen - VRRP tab
Field
RouterChecksumErrors The total number of VRRP packets received with
RouterVersionErrors
RouterVrIdErrors
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
Description
an invalid VRRP checksum value.
The total number of VRRP packets received with
an unknown or unsupported version number.
The total number of VRRP packets received with
an invalid VRID for this virtual router."
—End—