Viewing The System Log In The Web-Based Management Interface - Nortel 5510 Configuration

The syntax for the no logging command is:
no logging
The no logging command is executed in the Global Configuration
command mode.
default logging command
The default logging command configures the system settings as the
factory default settings for the system event log.
The syntax for the default logging command is:
default logging
The default logging command is executed in the Global Configuration
command mode.
clear logging command
The clear logging command clears all log messages in DRAM.
The syntax for the clear logging command is:
clear logging [non-volatile] [nv] [volatile]
" clear logging parameters" (page 17)
command.
clear logging parameters
Parameter
non-volatile
nv
volatile
The clear logging command is executed in the Privileged EXEC
command mode.

Viewing the system log in the Web-based Management Interface

The Web-based Management Interface can be used to view the System
Log. To perform this action, follow this procedure:
Step
1
Copyright © 2005 - 2007, Nortel Networks
.
Action
Open the System Log screen by selecting Fault > System Log
from the menu. This screen is illustrated in
(page 18).
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
outlines the parameters for this
Description
Clears log messages from NVRAM.
Clears log messages from NVRAM and DRAM.
Clears log messages from DRAM.
"System Log screen"
System logging 17