Nortel Ethernet Routing Switch 5500 Series; Nn47200-505 03.01 Standard - Nortel 5510 Configuration

Step
1
2
3
Copyright © 2005 - 2007, Nortel Networks
.
IPFIX configuration using the Java Device Manager 121
Action
Select Serviceability > IPFIX from the Device Manager menu. The
IPFIX dialog will open with the Global tab selected.
Select the Exporters tab. This tab is illustrated below.
IPFIX dialog - Exporters tab
The Exporters tab lists the IPFIX exporters that are currently
available. If connected to a standalone unit, the export properties
of that unit are listed. If connected to a stack, the export properties
of all units in the stack are listed. Using the fields provided, set up
the IPFIX export properties. These fields are explained in the table
below.
Exporters tab fields
Field Description
Slot(Unit) The switch that is exporting IPFIX flows. This number
corresponds to the unit number in a stack or is 1 for a
standalone unit.
AgingIntv The aging interval of the flow record in seconds. This is
an integer value between 0 and 2147400.
ExportIntv The frequency of data exports to the collector in
seconds. This is an integer value between 10 and 3600.
ExportState The current state of the exporter.
TempRefIntvSecThe template refresh time out in seconds. The template
is sent out to the collector either at the interval specified
in this value or after the number of packets specified
in the TempRefIntvPkts value, whichever occurs first.
This is an integer value between 300 and 3600.
TempRefIntvPkts The template refresh time out in numbers of packets.
The template is sent out to the collector either at the
interval specified in this value or after the number
of seconds specified in the TempRefIntvSec value,
whichever occurs first. This is an integer value between
10000 and 100000.

Nortel Ethernet Routing Switch 5500 Series

Configuration - System Monitoring

NN47200-505 03.01 Standard

5.1 27 August 2007