Cable Specification - Pilz PSEN enc sincos/HTL Operating Manual

Installation / Preparation for Commissioning

6.5 Cable specification

Analogue incremental signals (SIN/COS)
Signal
Supply
A, /A
B, /B
4
Z, /Z
Square-wave incremental signals (HTL)
Signal
Supply
A, /A
B, /B
4
Z, /Z
4
optional, the Z, /Z-signal is not evaluated from a safety viewpoint
Operating Manual PSEN enc sincos/HTL
1005022-EN-01
Description
2
Min. 0.34 mm and shielded, 0.5 mm
the cable cross-section must be matched to the cable length.
2
Min. 0.14 mm and shielded, 0.25 mm
to ensure the signal quality and to minimize possible environmental
influences, we recommend twisting each signal pair (±).
Description
2
Min. 0.34 mm and shielded, 0.5 mm
the cable cross-section must be matched to the cable length.
2
Min. 0.14 mm and shielded, 0.25 mm
to ensure the signal quality and to minimize possible environmental
influences, we recommend twisting each signal pair (±).
2
recommended. Generally
2
recommended. However,
2
recommended. Generally
2
recommended. However,
Seite 29 von 38