Electrical Characteristics; General; Device-Specific - Pilz PSEN enc sincos/HTL Operating Manual

Technical data

4.2 Electrical characteristics

4.2.1 General

Supply voltage
Reverse polarity protection
Short-circuit protection
Overvoltage protection
Power consumption without load
Analogue output signals
Square-wave output signals

4.2.2 Device-specific

Accuracy
Usable resolution
Safety-related
Functional
PSEN enc sincos
Incremental analogue output signals
Periods / revolution
Incremental signals
Track position, electrical
Reference signals
Output level
Output current
Output frequency
Short-circuit proof
Cable specification
PSEN enc HTL
Incremental square-wave output signals
Pulses / revolution
Incremental signals
Track position, electrical
Zero pulse
Output level HTL
Output current
Output frequency
Short-circuit proof
Cable specification
Operating Manual PSEN enc sincos/HTL
1005022-EN-01
10...30 V DC according to IEC 60364-4-41, SELV/PELV
yes
yes, by internal 1 A safety fuse
yes, up to  60 V DC
at 24 V DC
< 20 mA
< 40 mA
10 bit, 11 bit, 12 bit; depending on the device configuration
+ 2 bit interpolated
+ 8 bit interpolated
4096
A, /A, B, /B
90 °
Z, /Z, once per revolution
1 Vss ± 0.2 V at 100 , differential
20 mA
 500 KHz
yes
see Cable specification
1024
A, /A, B, /B
90 °
Z, /Z, once per revolution
Push-pull, supply voltage
50 mA, per channel
 100 KHz
yes
see Cable specification
Seite 17 von 38