Pilz PSEN enc sincos/HTL Operating Manual page 22

Mounting
➢ Radial slipping (slip) of the measuring system on the drive shaft must be prevented by means
of form closure by using a parallel key / groove combination (Figure 1, (2)); a coupling with
groove must be used for this purpose.
Figure 1: Flange mounting
Operating Manual PSEN enc sincos/HTL
1005022-EN-01
1: Measuring system
2: Parallel key
3: Centering collar
4: Machine
5: Coupling with groove
6: Drive shaft
Seite 21 von 38