PROGRAMMING
Change direction of rotation
of radio motor:
Tubular motor
Press and hold program
button for 6 sec.
Pairing another handheld
transmitter:
Tubular motor starts 1 x,
LED indicator flashes 1 x
1 x Press button P2 / Set Up
of the already paired transmitter
Delete handheld transmitter:
Delete a paired transmitter
1
Tubular motor starts 1 x,
a
LED indicator flashes 1 x
1 x Press button
P2 / Set Up
starts 2 x
Release
programm button
1 x Press button P2 / Set Up
of the new transmitter
a
1 x Press button
P2 / Set Up
Programming (pressing the buttons) must be carried out within 10 seconds.
Otherwise the system returns to its original state.
LED indicator
flashes 2 x
Programming (pressing the buttons) must be carried out within 10 seconds.
Otherwise the system returns to its original state.
LED indicator
flashes 1 x
1 x Press button P2 / Set Up
of the new transmitter
Programming (pressing the buttons) must be carried out within 10 seconds.
Otherwise the system returns to its original state.
LED indicator
b
flashes 1 x
1 x Press button
P2 / Set Up
Direction of rotation
Tubular motor starts 1 x,
LED indicator flashes 5 x
Tubular motor starts 1 x,
LED indicator flashes 6 x
will not be deleted
3T-MOTORS Tubular motors 12V | Programming
OK
is changed
OK
New transmitter
is paired
OK
Transmitter b
is deleted,
transmitter a
7