Public Address; Priority Interrupt - Hytera HM68X User Manual

Four types of ignition sense are listed in the following table. The default type is Disable Ignition Off, and other types are
enabled by your dealer.
Type
Allows you to turn the radio on or off by the
Ignition or Switch
engine or the On-Off key.
Allows you to turn the radio on or off by the
Ignition Only
engine.
Allows you to enable the PTT key by the
PTT Disable
engine.
Allows you to turn the radio on by the
Disable Ignition
engine or the On-Off key, and allows you to
Off
turn the radio off only by the On-Off key.

11.8 Public Address

Public Address allows you to address public through the external speaker (connected to the accessory connector on the
rear panel).
To enable Public Address, press the preprogrammed Public Address key.

11.9 Priority Interrupt

Priority Interrupt allows you to interrupt the ongoing activities (such as a call, a call hang status or remote monitor) on
the current channel to release it: therefore, you can initiate a new call or a new data service on that channel. This feature
includes manual priority interrupt and auto priority interrupt.
Manual Priority Interrupt
Press the preprogrammed Priority Interrupt key to interrupt the ongoing activities.
Auto Priority Interrupt
Auto Priority Interrupt includes Emergency Priority Interrupt, Call Back Priority Interrupt, Message Priority Interrupt,
Radio Disable Priority Interrupt, and All Call Priority Interrupt.
Description

To turn the radio on, start the engine or long
press the On-Off key.

To turn the radio off, stop the engine or press
the On-Off key.
 To turn the radio on, start the engine.
 To turn the radio off, stop the engine.
 To enable the PTT key, start the engine.
 To disable the PTT key, stop the engine.

To turn the radio on, start the engine or long
press the On-Off key.

To turn the radio off, press the On-Off key.
32
Operation