Settings; Basic Settings; Set Display; Set Usb Path - Hytera HM68X User Manual

9. Settings

You can set radio parameters including Basic Settings, Call Settings, and Security Settings.

9.1 Basic Settings

9.1.1 Set Display

On the home screen, go to Menu > Settings > Basic Settings > Display, and then set any of the following:
 Backlight
The backlight illuminates the display and keypad.
a. In the Display interface, select Backlight.
b. Toggle the Channel/Navigation key to select Off, On, or Timed.
c.
Press the OK/Menu key.
 Night mode
The display supports both day mode and night mode. The screen brightness and user interface vary with the display
mode.
a.
In the Display interface, select Night Mode.
b. Press the OK/Menu key to switch between the two modes.
 Brightness
Small level number represents high screen brightness.
a. In the Display interface, select Brightness.
b. Toggle the Channel/Navigation key to select a brightness level.
c.
Press the OK/Menu key.

9.1.2 Set USB Path

You can select a USB path for communication between the radio and external devices. For details, see the following table.
Option
When both the aviation port and accessory port
Rear Port
are connected to external devices, the accessory
First
connector can be used as the USB path.
Only Front Only the aviation port can be used as the USB
Port path.
Description
 Through the menu
a.
On the home screen, go to Menu >
Settings > Basic Settings > USB
Path.
b.
Select the USB path option.
19
Operation