Functions And Operations; Home Screen; Scan; Public Address - Hytera DMR Owner's Manual

Functions and Operations

Home Screen

The feature allows you to quickly return to the previous menu or
the home screen.
Operation:
In the editing screen, press the programmed Home Screen key,
and the radio exits the screen and returns to the previous menu
immediately; in other screens, press the key, and the radio returns
to the home screen immediately.

Scan

This feature allows you to listen to communication activities on
other channels so that you can keep a close track of your team
members.
Operation:
1. To enable the feature, you can select "On" from the menu
"Scan"; or
Press the programmed Scan key in the home screen; or
Switch to a channel on which the feature "Auto Scan" is
enabled via the programming software.
2. After the feature is enabled, your radio will scan according to
the scan list set for the channel on which scanning starts. The
scanning process is as follows:
 During scanning, the LCD displays the icon
flashes orange slowly.
 When activities are detected on a channel, the radio will stay
on the channel to receive current activities. If your radio stays
on a non-priority channel, the LCD will display icon
Priority Channel 1 or Priority Channel 2, the LCD will display
icon
 If you don't want to hear activities on the channel, press the
programmed Nuisance Temporary Delete key to remove the
channel from the scan list temporarily.
 If you want to continue staying on the channel, press the
programmed Monitor or Squelch Off key during scan stay.
3. To exit the scanning process, you can select "Off" from the
menu "Scan", or press the programmed Scan key again.

Public Address

This feature allows public address via the external speaker. After
the feature is enabled, your voice will not be transmitted, but out-
put via the external speaker (connected to the accessory jack on
the rear panel) if you hold down the PTT key and speak.
Operation:
1. Press the programmed Public Address key to enable the fea-
ture.
2. Hold down the PTT key and speak into the microphone. Then
your voice will be broadcasted clearly via the external speaker.
, and the LED
3. To disable the feature, press the Public Address key again.
or icon respectively.
Note: When this feature is enabled, you can neither
communicate with other users, nor enter the
menu.
; if on
17