Enable Gps Report; Connect To A Bt Device - Hytera HM68X User Manual

11.2.4 Enable GPS Report

GPS Report allows the radio to report its location information to the control center.
Press the preprogrammed GPS Report key, or you can consult your dealer to configure the GPS trigger, allowing the
radio to automatically report the GPS data upon power-on/off, or according to the preset time or distance interval.
Quick GPS
Based on GPS standard time, Quick GPS divides the GPS upload time into several equal-length time slices. These time
slices are allocated to radios with different configurations for periodic upload and single upload. Each radio uses the
same GPS upload time length to upload GPS data, improving upload efficiency and reliability.
If your dealer configures the feature to a digital channel, the channel only reports the quick GPS data.
11.3 BT
BT is a wireless technology that supports short-distance communications and data exchange between devices. You can
connect the radio to a BT device through the built-in BT module.
 To derive optimal communication quality, it is recommended to use the BT devices approved by the
Company.
 If BT earpieces of other companies are used, you must use them with the wireless ring PTT of the
Company. Otherwise, the earpieces cannot transmit.
On the home screen, go to Menu > BT.
Press the OK/Menu key.
After this feature is enabled, the LED indicator flashes blue every three seconds.
The BT feature applies only to radios with the BT module.

11.3.1 Connect to a BT Device

Turn on the BT device and enter the pairing status.
For details, refer to the accessory manual.
Search and connect to the BT device.
On the home screen, go to Menu > BT > Auto Search.
Select the BT device from the detected device list.
29