Receive An All Call; End An All Call; Analog Call - Hytera HM68X User Manual

Select an all call contact.
Press and hold the PTT key.
Through One Touch Call/Menu
Press the preprogrammed One Touch Call/Menu key, and then press and hold the PTT key.

6.3.2 Receive an All Call

You can answer an all call without any operation.

6.3.3 End an All Call

An all call ends when the caller releases the PTT key.

6.4 Analog Call

An analog call is a call on the analog channel.
Call without Signaling
On an analog channel without signaling, you can initiate a call to all the other users on the channel.
On the home screen, toggle the Channel/Navigation key to select an analog channel.
Press and hold the PTT key.
Call with Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel.
 Contact your dealer to pre-configure the signalings.
 HDC1200 (compatible with MDC1200) and two-tone signalings are available.
 The method to make a call with signaling is the same, regardless of signaling types.
On the home screen, go to Menu > Contact, or press the preprogrammed Contact List or Favorite Contact List
key.
Select a contact.
Press and hold the PTT key or the preprogrammed One Touch Call/Menu key.
16