Table of Contents
Advertisement
Control electronics
Control electronics
VTD-60.XX-K5C-S
VTD-60.XX-K5C-S
2.10
Conversions and modifications
Only operate the control electronics in their original and faultless condition. Retrofitting, modifying, and converting the control
electronics is strictly prohibited. Any modifications you wish to make must always be agreed with ebm-papst first.
ebm-papst is not liable for any conversions and modifications carried out which have not been expressly approved by us. This
also includes any damage resulting from the use of non-original parts or through operating the device outside of the agreed
parameters.
2.11
Transport and storage
• Transport and store the control electronics in their original packaging only.
• Store the control electronics so that they are protected from environmental influences and dirt until final installation.
• We recommend storing the control electronics for no longer than one year in order to guarantee trouble-free operation and
the longest possible service life.
• If the device is stored for an extended period, it must be connected and started at least every two years.
• Comply with the ambient temperatures specified in Chapter "4 Technical data" on page 16.
2.12
What to do in the event of malfunctions and irregularities
The device may only be used in perfect condition. If you notice irregularities, malfunctions, or damage, shut down the device
immediately and inform your manager (if there is one).
The user/owner of the control electronics and associated accessories should address all complaints about the product to one of
ebm-papst's representatives or directly to:
ebm-papst St. Georgen
GmbH & Co. KG
Hermann-Papst-Strasse 1
78112 St. Georgen
Item no.: HAB 100177146 - 000 · ENU · Change 1.1· Approved 2023-02-21
Safety information
9/37
Advertisement
Table of Contents
