ebm-papst VTD-60.05-K5C-S Translation Of The Original Operating Instructions page 36

Accessories
8 Accessories
8.1 Accessories available to order
Designation
Cable set VTD-60.05-K5C-S
USB CAN adapter
Functional description of LED displays
LED designation
LED0 "Power"
LED1 "State"
LED2 "Error"
LED3 "Rx"
LED4 "Tx"
8.2 Software "epTools"
For settings and parameterization of the control electronics, the
PC software "epTools" is required. Operation is described in the
"epTools" software help file.
The respective current version of the "epTools" software can be found on our
homepage: https://www.ebmpapst.com/software.
Item no.: HAB 100177146 - 000 · ENU · Change 1.1 · Approved 2023-02-21
36/37
Order number
8315 121 035
914 0000 401
Color Display
Green
Not lit up
Flashing
Not lit up
Yellow
Flashing
Red
Not lit up
Flashing
Green
Not lit up
Flashing
Yellow
Not lit up
Description
Cable set; mating connec-
tor included in scope of
delivery
USB interface adapter
Function assignment
Lit up
Bootloader mode (no firmware)
Bootloader mode (flashes in the event of
Lit up
Flashes in the event of incoming message
Flashes in the event of outgoing message
Control electronics Control electronics
VTD-60.XX-K5C-S VTD-60.XX-K5C-S
Normal operation
No power supply
Normal operation
incoming message)
Error
No error (normal operation)
No incoming message
No outgoing message