Screen Illumination - Emos P56201 Manual

The time of the first temperature change will be flashing; you can set the time
by repeatedly pressing
The temperature value will begin flashing; set by repeatedly pressing
P1 will appear below the set temperature, indicating the 1st temperature
change in the day.
Confirm by pressing
change (P2 will appear under the temperature).
Set the time and temperature by following the same steps as when setting the
1st temperature change.
Continue the process until all 6 temperature changes (P1 to P6) are set.
Factory pre-set times and temperatures are as follows:
Monday to Friday
Temperature change
P1
P2
P3
P4
P5
P6
Saturday to Sunday
Temperature change
P1
P2
P3
P4
P5
P6

Screen Illumination

Pressing any button will illuminate the screen for 15 seconds.
Other Technical Settings
Long-press the button for about 5 seconds.
Repeatedly pressing the
adjusted using the
Connecting the Thermostat to WiFi (COFI)
Long-press the button for about 5 seconds.
Then press and hold the
E2 will appear on the screen and the
(10 minute increments), then confirm with
. Continue by setting the start of the second temperature
Time
6:30
8:30
12:00
14:00
16:30
22:30
Time
7:30
9:30
11:30
13:30
16:30
22:30
button selects from the functions below, values are
buttons.
button for 3 seconds.
icon will be flashing.
19
Temperature
20 °C
16 °C
16 °C
16 °C
21 °C
7 °C
Temperature
20 °C
20 °C
20 °C
20 °C
20 °C
15 °C
.
.