Equipment Symbols - HP Brocade 4Gb SAN Installation Manual

NOTE: Provides additional information.
TIP: Provides helpful hints and shortcuts.

Equipment symbols

Any enclosed surface or area of the equipment marked with these symbols indicates the
presence of electrical shock hazards. Enclosed area contains no operator serviceable parts.
WARNING!
indicates the presence of electrical shock hazards. Enclosed area contains no operator
serviceable parts.
To reduce the risk of personal injury from electrical shock hazards, do not open this enclosure.
WARNING!
Connection.
To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone
or telecommunications connectors into this receptacle.
WARNING!
presence of a hot surface or hot component. If this surface is contacted, the potential for injury
exists.
To reduce the risk of injury from a hot component, allow the surface to cool before touching.
WARNING!
supplied by multiple sources of power.
To reduce the risk of injury from electrical shock, remove all power cords to completely
disconnect power from the system.
WARNING!
component exceeds the recommended weight for one individual to handle safely.
To reduce the risk of personal INJURY or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manual material handling.
Any enclosed surface or area of the equipment marked with these symbols
Any RJ-45 receptacle marked with these symbols indicates a Network Interface
Any surface or area of the equipment marked with these symbols indicates the
Power Supplies or Systems marked with these symbols indicate the equipment is
Any product or assembly marked with these symbols indicates that the
Brocade 4Gb SAN Switch for HP p-Class BladeSystem installation guide 9