Boards
Removing a board
Fig. 27: Removing a board (1)
•
Press the clip in the direction of the arrow (1) and unhook it.
•
Pull off the clip (2).
•
Remove the board from the casing (3).
•
Place the board into the appropriate packaging.
C
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot plate.
Fig. 28: Removing a board (2)
•
Push the rear slot cover plate into the slot (1). Ensure that the point of the cover
engages on the outside of the housing.
•
Put the clip on. Make sure that the pin (a) is inserted into the screw hole.
•
Press the clip in the direction of the arrow (2). Make sure that the clip engages when
released.
Siemens
Medical Solutions
TD00-400.841.40.02.02
01.08
Page 31 of 52
CS SD SP/CO
31
4.1
CELSIUS M450/440