Installing The Rear Fan And The Ventilation Duct - Siemens CELSIUS M450 Replacement

Fans, ventilation duct, crosspiece

Installing the rear fan and the ventilation duct

•
Connect the fan cable to the mainboard, at the connection point you noted before (refer
to (Fig. 9 / p. 14)
Fig. 20: Air flow of the rear fan
•
Mount the rear fan in the ventilation duct (4 hooks).
•
Pull the fan cable off the fan before installing the ventilation duct in the device.
•
Connect the fan cable to the corresponding connector on the mainboard (also see the
technical manual for the mainboard).
Siemens
Medical Solutions
, "Rear fan").
NOTE
When routing the fan cable, make sure that it is not kinked
or pinched.
When fitting the ventilation duct, be careful not to damage
the processor cooler(s) on the mainboard.
TD00-400.841.40.02.02
01.08
Page 23 of 52
CS SD SP/CO
23
0
CELSIUS M450/440