Hard Disk Drive; Removing A Hard Disk Drive; Installing A Hard Disk Drive - Siemens CELSIUS M450 Replacement

40

Hard disk drive

Removing a hard disk drive

Fig. 41: Removing a hard disk drive (1)
•
Disconnect the data and power supply cables of the hard disk drive.
•
Press the EasyChange rails in the direction of the arrows (1).
•
Pull the hard disk drive out of the carrier (2). Set the jumpers as it was before.
Fig. 42: Removing a hard disk drive (2)
•
Pull the EasyChange rails off the hard disk drive.
•
If necessary, make the required settings on the remaining hard disk drive.

Installing a hard disk drive

•
Take the new hard disk drive out of its packaging.
•
Make the required settings on the drive.
CELSIUS M450/440 TD00-400.841.40.02.02
01.08
Page 40 of 52
CS SD SP/CO
Drives
5.2
0
0
Siemens
Medical Solutions