Removing And Installing The Bus Board - Siemens SIMATIC PC BI10 Technical Description

System Unit
1.4.10

Removing and Installing the Bus Board

Figure 1-29 Removing and Installing the Bus Board
1-32
Open the system unit as described in Section 1.4.1.
Remove all modules from the slots (proceed as described in
Section 1.4.9).
Release the screws on the exterior of the system housing and pull the bus
board out of the mother board.
Proceed in reverse order to install the bus board.
SIMATIC PC BI10/FI10/FI15, Technical Description
C79000-G7076-C773-03