Table of Contents
Advertisement
ETC Installation Guide
ALCR-DIN
Phase Dimmer Control
• When normal power is present, the emergency fixture behaves as a
normally controlled fixture.
• When the normal power is lost, when the [Push to Test] button is
pressed, or when the remote activation input is activated (opened),
the emergency fixture turns On full.
Emergency Neutral (Gray)
Emergency Power In (Black)
Phase
Dimmer
Normal Neutral (White)
Normal Power Sense (Black)
0–10 V Fixture Control
• When normal power is present and the normal control sense switch
is closed, 0–10 VDC controlled fixture dims according to the control
signal.
• When normal power is present and the normal control sense switch
is open, the 0–10 VDC controlled fixture turns Off.
• Upon loss of normal power, when the [Push to Test] button is
pressed, or when the remote activation input is activated (opened),
0-10 VDC control is bypassed and the fixture turns On to full.
0–10 V
Emerg. Fixture
0–10 V Non-
Emerg. Fixture
ALCR-DIN
Line
Neutral
Load
ALCR-DIN
0–10 VDC Signal
Emergency Power In
Emergency Neutral
Emergency Power Out
Normal Neutral Sense
Normal Control Sense
Page 10 of 12
Emergency Power Out (Red)
0–10 V Common
0–10 VDC Signal
Remote Act. Input
ALCR-DIN
Switch
Emergency
Fixture
0–10 V
Controller
Normal Neutral
Normal Power Sense
ETC
Advertisement
Table of Contents
