Mounting The Scg Onto A Server Rack; What You Will Need; Step 1: Unpack The Rack Mount Kit - Ruckus Wireless SmartCell 200 Getting Started Manual

Mounting the SCG onto a Server Rack

Mounting the SCG onto a Server Rack
The SCG is a 2U form factor server designed for mounting onto a standard EIA 19"
server rack. The supplied mounting hardware supports mounting on server racks
that are 22.5" to 32.5" deep. For racks of depth less than 22.5", use the TMLC-
MOUNT21 rack mount kit (available at Avnet and manufactured by Kontron).
Before installing the SCG appliance onto a server rack, verify that all package
contents (see
all the required hardware and tools.

What You Will Need

• 3/8-inch hex driver or wrench
• Phillips (crosshead) screwdriver, #1 and #2 bits
• Anti-static wrist strap and conductive foam pad (recommended)

Step 1: Unpack the Rack Mount Kit

Refer to Rack Mount Kit Contents
complete.
16
Unpacking the SCG) are included and ensure that you have prepared
and verify that the rack mount kit contents are
Ruckus Wireless, Inc.