Cannot Connect To The Network - Sony STR-AZ7000ES Help Manual

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES

Cannot connect to the network.

Check that the LAN cable is connected to the receiver when you want to connect the receiver to the network via a wired LAN connection.
Check the network information. If the connection failed, set up the network connection again.
If the receiver is connected through a wireless network, move the receiver and the wireless LAN router/access point closer to each other and perform the setup again.
Make sure that you use a wireless LAN router/access point.
Make sure that the wireless LAN router/access point is turned on.
Check the settings of the wireless LAN router/access point and perform the setup again. For details on the settings of devices, refer to the operating instructions of the
devices.
Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the receiver away from these devices.
Related Topic
Checking the network information (Network Connection Status)
5-037-021-11(1) Copyright 2022 Sony Corporation
344