Sony STR-AZ7000ES Help Manual page 20

Adjusts the volume level of all speakers at the same time.
11.
CUSTOM1
Saves and recalls various settings for the receiver.
Press to select the custom preset setting.
Press and hold to save the current settings to a preset.
12.
/ (previous/next), (play/pause) (*)
Skip, play, pause operation.
PRESET +/–
Select preset stations or channels. Press and hold to scan stations automatically.
13.
AUTO CAL
Press to perform the Auto Calibration
14.
TEST
Displays the [Test Picture]/[Test Tone] selection screen on the TV screen.
15.
SETTINGS
Displays the [Setup] menu on the TV screen.
16.
2CH/MULTI, MOVIE, MUSIC
Selects the sound field you want.
17.
DISPLAY
Press to view information on the TV screen.
18.
BACK
Returns to the previous menu or exits a menu or on-screen guide that is displayed on the TV screen.
19.
BLUETOOTH TX/RX
Switches the [Bluetooth Mode] to [Transmitter] or [Receiver].
In [Transmitter] mode, the receiver sends audio to BLUETOOTH headphones/speakers.
In [Receiver] mode, the receiver receives and outputs audio from the remote device.
20.
(muting)
Turns off the sound temporarily.
Press the button again to restore the sound.
21.
HDMI OUT
Switches the output for two TVs connected to the HDMI OUT A and HDMI OUT B (ZONE 2) jacks.
When [HDMI OUT B Mode] is set to [Main] in [HDMI Settings], output is toggled between [HDMI A], [HDMI B], [HDMI A+B] and [HDMI OFF] each time the button is pressed.
Select [HDMI OFF] to turn off the output for HDMI OUT A and HDMI OUT B (ZONE 2) jacks.
When [HDMI OUT B Mode] is set to [Zone2], output is toggled between [HDMI A] and [HDMI OFF] each time the button is pressed.
*
The (play/pause) and (volume) + buttons have tactile dots. Use the tactile dots as reference when operating the receiver.
Note
The above explanations are intended to serve as examples.
Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote control.
5-037-021-11(1) Copyright 2022 Sony Corporation
20