Sony STR-AZ7000ES Help Manual page 216

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Adjusting the equalizer (Equalizer)
You can use the following parameters to adjust the tonal quality (bass/treble level) of each speaker.
Level (dB)
Frequency (Hz)
Bass
Treble
Select [Sound Effects] - [Equalizer] from the home menu.
1
Select [Front], [Center], [Front Wide] (*), [Surround], [Height1], [Height2], [Height3] (*), [Top Front] (*), [Top Center] (*), [Top Rear] (*), [Bottom Front] (*) or [Bottom
2
Center] (*).
Select [Bass] or [Treble].
3
Adjust the gain.
4
*
for STR-AZ7000ES
Note
This function does not work in the following cases:
[Pure Direct] is set to [On].
[Bluetooth Mode] is set to [Transmitter].
[DSD Native] is set to [On], and the receiver is playing audio signals in DSD format.
Frequencies for [Bass] and [Treble] are fixed.
Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original sampling frequency of the input signals.
Hint
You can also select [Equalizer] in [Setup] - [Speaker Settings] - [Manual Speaker Settings] from the home menu.
5-037-021-11(1) Copyright 2022 Sony Corporation
216