Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Assigning the surround back speaker terminals (Surround Back Speaker Assign)
You can set the assignment for the SPEAKERS SURROUND BACK terminals.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Manual Speaker Settings].
2
3
Select [Surround Back Speaker Assign].
4
Select the setting you want.
Zone2: When using the Zone 2 connection.
BI-AMP: When using the bi-amplifier speaker connection.
Front B: When using the front B speaker connection.
Off: When none of the above connections is used.
Note
You can only set [Surround Back Speaker Assign] under the following conditions:
The speaker pattern is set to a setting without surround back and height speakers.
[Bluetooth Mode] is set to other than [Transmitter].
Related Topic
Connecting 5.1.2-channel speaker system with bi-amplifier connection
Connecting 7.1-channel speaker system with Zone 2 connection
Selecting the speaker pattern (Speaker Pattern)
Selecting the front speakers
5-037-021-11(1) Copyright 2022 Sony Corporation
223
Advertisement
Table of Contents
