Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Enjoying content of a connected device without turning on the receiver (Standby Through)
You can output HDMI signals to the TV even when the receiver is in standby mode.
Select [Setup] - [HDMI Settings] from the home menu.
1
Select [Standby Through].
2
3
Select the setting you want.
Auto: The receiver outputs HDMI signals to the TV from the HDMI OUT A jack when the TV is turned on while the receiver is in the standby mode.
Sony recommends this setting if you are using a "BRAVIA" Sync-compatible TV manufactured by Sony. This setting saves power in the standby mode compared to the [On]
setting.
On: The receiver continuously outputs HDMI signals from the HDMI OUT A jack when in standby mode.
Off: The receiver does not output HDMI signals when in standby mode. This setting saves power in the standby mode compared to the [On] setting.
Note
When the receiver is in standby mode, the
The top of the cabinet may become hot. This is because part of the circuit(s) inside the receiver is(are) still turned on, and is not a malfunction.
When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than when [On] is selected.
This function does not work for the HDMI OUT B (ZONE 2) jack.
(power) indicator on the front panel lights up in amber if [Standby Through] is set to [On] or [Auto].
5-037-021-11(1) Copyright 2022 Sony Corporation
234
Advertisement
Table of Contents
