Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Selecting the speaker impedance (Speaker Impedance)
You can set the speaker impedance.
Select [Setup] - [Speaker Settings] from the home menu.
1
2
Select [Manual Speaker Settings].
Select [Speaker Impedance].
3
Select the setting according to the speakers you are using.
4
8 Ω
4 Ω
Note
If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.)
When you connect speakers all with a nominal impedance of 8 ohms or higher, set this function to [8 Ω]. When connecting other types of speakers, set it to [4 Ω].
5-037-021-11(1) Copyright 2022 Sony Corporation
227
Advertisement
Table of Contents
