Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Updating the software (Software Update)
By updating your software to the latest version, you can take advantage of the newest functions.
The new software is available when:
the [UPDATE] indicator lights up on the display panel.
a message appears on the TV screen if the [Software Update Notification] is set to [On].
Note
Do not turn the receiver off or disconnect the AC power cord (mains lead) and the LAN cable until the download and update processes are completed. Doing so may cause a malfunction.
When you use Sony wireless rear speakers/subwoofer (not supplied), turn on each speaker and make sure the connection with the receiver is established.
1
The power indicator of the Sony wireless rear speakers/subwoofer (not supplied) lights up in green.
Select [Setup] - [Software Update] from the home menu.
2
Select [Network Update] or [USB Update].
3
If you select [USB Update], please visit the following customer support website to download the latest software version.
https://www.sony.com/am/support
Check the software update progress.
4
The progress rate is displayed in percentage.
The progress of loading software will be displayed as [DOWNLOAD XXX%] for the network update, and [READING XXX%] for the USB update.
When the update is completed, [UPDATE COMPLETED] appears on the display panel and the receiver restarts automatically.
Note
It may take up to about 20 minutes for the update to be completed.
You cannot restore the old version after updating the software.
Set [Auto Update Settings] to [On] when you want to perform software updates automatically. Depending on the contents of the updates, software update may be performed even if you set [Auto
Update Settings] to [Off].
If the update of Sony wireless rear speakers/subwoofer (not supplied) does not work, move them closer to the receiver and update them.
5-037-021-11(1) Copyright 2022 Sony Corporation
285
Advertisement
Table of Contents
