Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Enjoying sound in Zone 2
You can enjoy sound from the receiver in Zone 2 by the following procedure.
Press ZONE 2
(power) on the remote control.
1
2
Press ZONE 2 on the remote control.
3
While ZONE 2 on the remote control is lit in red, press the input button and select the source signal you want to output.
4
Start playback on the input device that you selected.
5
Adjust the volume.
Press ZONE 2 on the remote control, and press
Hint
You can also activate Zone 2 by pressing ZONE 2
After Zone 2 is activated, you can also select source signals using the input buttons on the receiver or adjust the volume level using MASTER VOLUME on the receiver while the display panel of the
receiver is in one of the following states:
While [ZONE2 POWER ON] is displayed just after Zone 2 has been activated.
While displaying [ZONE2 INPUT xxxx (input name)] by pressing ZONE CONTROL on the receiver.
To exit Zone 2 function
Press ZONE 2
(power) on the remote control to turn off the Zone 2 power.
To exit Zone 2 operation
Select [Zone Controls] - [Zone2] - [Power] from the home menu, then select [Off].
Available inputs and functional restrictions in Zone 2
See
"Available input sources for each
zone."
(volume) +/– to adjust the volume while ZONE 2 on the remote control is lit in red.
(power) on the receiver.
5-037-021-11(1) Copyright 2022 Sony Corporation
169
Advertisement
Table of Contents
