Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Selecting the BLUETOOTH mode (Bluetooth Mode)
You can enjoy content from remote devices via this receiver, or listen to sound from this receiver via a BLUETOOTH receiver such as headphones or speakers.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Bluetooth Mode].
2
3
Select the setting you want.
Receiver: This receiver is in receiver mode which enables it to receive and output audio from a BLUETOOTH device.
Transmitter: This receiver is in transmitter mode which enables it to send audio to a BLUETOOTH receiver (headphones/speakers).
[BT TX] appears on the display panel.
Off: The BLUETOOTH power will be turned off and you will not be able to use the BLUETOOTH function.
Note
[Bluetooth Mode] cannot be switched while the input of this receiver is set to [Bluetooth Audio].
No sound is output from the speakers connected to this receiver when [Bluetooth Mode] is set to [Transmitter].
In [Transmitter] mode, this receiver can send audio to up to 1 device.
Hint
You can set the transmission data rate for LDAC playback using [Wireless Playback Quality] in the [Bluetooth Settings].
If you connect to this receiver from your smartphone while [Transmitter] is selected and no other BLUETOOTH receiver is connected to this receiver, the setting automatically switches to [Receiver]
and you can listen to the sound from your smartphone via this receiver.
You can also switch between BLUETOOTH RX (Receiver) mode and BLUETOOTH TX (Transmitter) mode by pressing BLUETOOTH RX/TX on the remote control.
Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver from this receiver when [Transmitter] is selected.
5-037-021-11(1) Copyright 2022 Sony Corporation
263
Advertisement
Table of Contents
