Certification; Approvals; Csa - Siemens SIMATIC NET RUGGEDCOM RS930L Installation Manual

Certification

The RUGGEDCOM RS930L device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RS930L complies.
Note
All relevant certificates and test reports are available on
Support
6.1.1

CSA

This device meets the requirements of the following Canadian and U.S. standards
under certificate 1550963:
•
•
•
•
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
RUGGEDCOM RS930L
Installation Manual, 11/2022, C79000-G8976-1034-11
[https://support.industry.siemens.com].
CAN/CSA-C22.2 No. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety Part 1: General Requirements
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
US
Siemens Industry Online
6
29