System Configuration Screen Options - Dell Latitude 7210 2-in-1 Service Manual

Option Description
Timeout on ● 5 sec
Battery
● 10 sec—enabled by default
● 15 sec
● 30 sec
● 1 min
● 5 min
● 15 min
● Never
Keyboard The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not
Backlight affected. Keyboard Illumination will continue to support the various illumination levels. This field has an
Timeout on AC effect when the backlight is enabled. The options are:
● 5 sec
● 10 sec—enabled by default
● 15 sec
● 30 sec
● 1 min
● 5 min
● 15 min
● Never
Unobtrusive This option, when enabled, pressing Fn+shift+B turns off all light and sound emissions in the system. To
Mode resume normal operation, press Fn+shift+B again. This option is disabled by default.
Miscellaneous Allows you to enable or disable the following devices:
Devices
● Enable Front Camera—enabled by default
● Enable Back Camera—enabled by default
● Secure Digital (SD) card—enabled by default
● Secure Digital (SD) card boot
● Secure Digital (SD) card read-only-mode

System Configuration screen options

Option Description
Integrated NIC Does not allow you to control the on-board LAN controller. The options are:
● DisabledThe internal LAN in off and not visible to the operating system.
● DisabledThe internal LAN is enabled.
● Disabled w/PXEThe internal LAN is enabled (with PXE boot). This option is enabled by default.
Drives Allows you to configure the various drives on board. All drives are enabled by default. The option is:
● M.2 2230 PCI-e SSD
SMART This field controls whether hard drive errors for integrated drives are reported during system startup. This
Reporting technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
● Enable SMART Reporting
USB
This is an optional feature.
Configuration
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
● Enable USB Boot Support
● Enable External USB Port
System setup 91