Power Button Board; Removing The Power-Button Board - Dell Latitude 7210 2-in-1 Service Manual

Hide thumbs Also See for Latitude 7210 2-in-1:
Table of Contents

Advertisement

6. Replace the:
a.
display panel assembly
b.
microSD card
c.
SIM card tray
7. Follow the procedure in

Power Button Board

Removing the power-button board

Steps
1. Follow the procedure in
2. Remove the:
a.
microSD card
b.
SIM card tray
c.
display panel assembly
d.
heat-sink assembly
3. Unroute the WLAN antenna cables from the routing guides on the computer [1].
4. Open the latch and disconnect the power-button board FPC from the connector on the system board [2].
5. Peel the power-button board FPC from the computer [1].
6. Open the latch and disconnect the fingerprint reader FFC from the power-button board [2].
After working inside your
Before working inside your
tablet.
tablet.
Disassembly and reassembly
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

T04j

Table of Contents