Table of Contents
Advertisement
System Configuration screen options
Option
Description
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI:
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA-0
● SATA-1
SMART
This field controls whether hard drive errors for integrated drives are reported during system startup. This
Reporting
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
● Enable SMART Reporting
USB
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
Configuration
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
● Enable USB Boot Support (by default enable)
● Enable External USB Port (by default enable)
USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external
devices using the stored system battery power through the USB PowerShare port.
Audio
This field enables or disables the integrated audio controller. By default, the Enable Audio option is
selected. The options are:
● Enable Microphone (by default enable)
● Enable Internal Speaker (by default enable)
Miscellaneous
Allows you to enable or disable the following devices:
Devices
● Enable Camera (enabled by default)
● Enable Secure Digital (SD) card (enabled by default)
Video screen options
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE:
The video setting will be visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
This option is enabled by default.
NOTE:
All devices are enabled by default.
System Setup
69
Advertisement
Table of Contents
