Display Panel Assembly; Removing The Display Panel Assembly - Dell Latitude 7210 2-in-1 Service Manual

Next steps
1. Follow the procedure in

Display panel assembly

Removing the display panel assembly

About this task
NOTE: There are two different configurations of the Latitude 7210 2-in-1:
● Non-security configuration with non-captive screws.
● Security configuration with captive screws.
Latitude 7210 2-in-1 has the kickstand power on feature. When the kickstand is deployed, the tablet will power
on. If the tablet is powered on with the kickstand deployed, press and hold the power button to turn off the
tablet, and then begin the tablet disassembly. There is no need to close the kickstand, proceed to remove the
screws securing the display assembly.
Steps
1. Follow the procedure in
2. Remove the:
a. microSD card
b. SIM card tray
3. Press the release tabs and lift the display back cover upwards.
16 Disassembly and reassembly
after working inside your
Before working inside your
computer.
tablet.