Docking Board Connector; Removing The Docking Connector - Dell Latitude 7210 2-in-1 Service Manual

b. WWAN main antenna module
c. Heat sink assembly
d. Rear-facing camera
e. display panel
f. microSD card
g. SIM card tray
h. battery
5. Follow the procedure in

Docking board connector

Removing the docking connector

Steps
1. Follow the procedure in
2. Remove the:
a. microSD card
b. SIM card tray
c. display panel assembly
3. To remove the docking connector:
a. Open the latch and disconnect the docking connector FPC from the system board [1].
b. Peel the docking connector FPC from the computer [2].
c. Remove the M2x2.5 screws that secure the docking-board bracket to the docking board [1].
d. Lift the docking-board bracket away from the docking board [2].
After working inside your
Before working inside your
tablet.
tablet.
Disassembly and reassembly 59