Table of Contents
Advertisement
Alternatively, perform the measurement when the wiring under
test is electrically quiet.
The effect of highly inductive or capacitive loads and mains
disturbances can be to reduce accuracy on the lower two
ranges, e.g. if the actual loop impedance of the circuit under
test is <1.7Ω then the EZ165 / EZ365 may indicate in the range
1.7Ω to 5Ω.
4. MAINTENANCE
4.1 Cleaning
Prior to cleaning, ensure the EZ165 / EZ365 is disconnected
from any live circuits.
If contamination is found, clean with a damp soft cloth and, if
necessary, a mild detergent or alcohol. Do not use abrasives,
abrasive solvents, or detergents which can cause damage to the
unit. If a mild detergent is used, the unit should subsequently
be thoroughly cleaned with a water dampened soft cloth. After
cleaning, dry and allow to remain in a dry environment for 2
hours before use.
4.2 Repair & Service
There are no user serviceable parts. Return to Martindale
Electric if faulty. Our service department will quote promptly to
repair any fault that occurs outside the guarantee period.
4.3 Storage Conditions
The EZ165 / EZ365 should be kept in warm dry conditions away
from direct sources of heat or sunlight, and in such a manner as
to preserve their working life. It is strongly advised that they are
not kept in a tool box where other tools may damage them.
12
Advertisement
Table of Contents
