Maintenance; Battery Replacement; Cleaning; Repair And Service - Martindale Electric VT4 Instruction Manual

4. MAINTENANCE

4.1 Battery Replacement

To gain access to the battery compartment,
press down on the square recess and pull back
the battery compartment end cap (7).
Fit 2 new 1.5V, AAA alkaline batteries (IEC LR03,
NEDA 24A), observing correct polarity.
Replace the battery compartment end cap.
Note: Do not mix old and new batteries.
Square recess
7

4.2 Cleaning

Warning
To reduce the risk of surface leakage, this
instrument must be kept in a clean condition.
If contamination is found, clean with a damp
soft cloth and if necessary a mild detergent or
alcohol. Do not use abrasives, abrasive solvents,
or detergents which can cause damage to the
unit. If a mild detergent is used, the unit should
subsequently be thoroughly cleaned with a water
dampened soft cloth. After cleaning, dry and
allow to remain in a dry environment for 2 hours
before use.
Pull
9

4.3 Repair and Service

There are no user serviceable parts in this unit.
Return to Martindale Electric if faulty. Our service
department will quote promptly to repair any fault
that occurs outside the guarantee period.
Before the unit is returned, please ensure that
you have checked the unit and batteries.

4.4 Storage Conditions

The instrument should be kept in warm dry
conditions away from direct sources of heat or
sunlight, and in such a manner as to preserve
the working life of the unit. It is strongly advised
that the unit is not kept in a tool box where other
tools may damage it.
10