Download
Share
Print this page
CAMSO ATV T4S Installation Manuallines
  1. Manuals
  2. Brands
  3. CAMSO Manuals
  4. Automobile Accessories
  5. Camoplast ATV T4S
  6. Installation manuallines

CAMSO ATV T4S Installation Manuallines

Track systems for all-terrain / side-by-side vehicles
Hide thumbs Also See for ATV T4S:

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDELINES
GUIDE D'INSTALLATION
CAMSO TRACK SYSTEMS FOR ALL-TERRAIN / SIDE-BY-SIDE VEHICLES
SYSTÈMES DE CHENILLES CAMSO POUR VÉHICULES TOUT-TERRAIN ET CÔTE À CÔTE
ARCTIC CAT
5000-01-0650-MAN
VERSION G

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATV T4S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CAMSO ATV T4S

Summary of Contents for CAMSO ATV T4S

  • Page 1 INSTALLATION GUIDELINES GUIDE D’INSTALLATION CAMSO TRACK SYSTEMS FOR ALL-TERRAIN / SIDE-BY-SIDE VEHICLES SYSTÈMES DE CHENILLES CAMSO POUR VÉHICULES TOUT-TERRAIN ET CÔTE À CÔTE ARCTIC CAT 5000-01-0650-MAN VERSION G...
  • Page 2 Track System which will not be covered under normal warranty. TECHNICAL SUPPORT If your dealer or distributor is unable to solve a problem related to the System, you may contact the Camso support team from Monday to Friday.
  • Page 3 No matter where or in what conditions, get there and back safely with your Camso track systems. Ready to benefit from optimal traction, mobility, stability, and flotation? Let’s go make tracks!
  • Page 4 PARTS LIST CAUTION: Before beginning the installation, make sure that you have received all the components included in the parts lists below. ITEM PART # DESCRIPTION 1004-01-2065 FRONT BRACKET KIT ANTI-ROTATION FRONT BRACKET - LH ANTI-ROTATION FRONT BRACKET - RH FRONT COVER - LH FRONT COVER - RH 1033-10-0045...
  • Page 5 PREPARATION TORQUE SPECIFICATIONS 1. Set each Track System unit near the position Recommended torque specifications according to indicated by the sticker affixed on the frame. bolt size and grade. GRADE DIMENSION lb-ft M6-1.0 M8-1.25 M10-1.5 M12-1.75 Fig. 2 NOTE: Use a thread locker (Loctite 262 or equivalent) at the specific points of the System indicated in ** IMPORTANT: Start by installing the REAR Track the User Manual’s exploded views.
  • Page 6 NOTE: Make sure to insert the bolt in the position of the lower arm’s tube. See Fig. 7 designed for your Track System model. ATV T4S / ATV R4S Fig. 7 Fig. 4 7. Insert the new M10x110mm bolt (B2) through the...

  • Page 7: Table Of Contents

    10.Verify that spring assembly bolt (6) is tightened to the recommended torque specification: 75 N•m [55 lb•ft]. Refer to Fig. 11 ATV T4S / ATV R4S Fig. 9 9. Attach stabilizing rod (1) to anchor bracket (2), using spacer bushings (3), washer (4), and nut (5).

  • Page 8: Fig. 12

    FRONT TRACK SYSTEM 5. Position bottom part of anchor bracket (A1-A2) under lower suspension arm. Position top part (A3- INSTALLATION A4) over suspension arm and insert tenon in mortise cut in bottom part. See Fig. 15 1. Remove front wheels. Make sure that wheel studs and wheel hubs are free of dirt.

  • Page 9: Caution: Components Must Be Assembled In The Order Shown

    FINAL INSTALLATION 1. Verify the suspension settings. If the shock absorbers are adjustable, adjust them to the stiffest setting to allow for maximum clearance between the System and the vehicle’s fenders. See Fig. 20 Fig. 17 8. Attach the stabilizing rod (2) to the anchor bracket (1), using the two spacers (3), washer (4), and nut (5).
  • Page 10 ADJUSTMENTS 4. Install footrest protectors (D6-D7). fasteners provided: U-bolt (D2) with washers (D3) CAUTION: The Track System is designed to provide and nuts (D4), and M8 bolt (D1) with nut (D5). See the best traction performance and floatability. Fig. 22 Adjustments such as alignment, track tension, and angle of attack are necessary for optimal System performance.

This manual is also suitable for:

Atv r4sX4s